Product features

Very universally applicable

Low odour

Sustainable, strong and fast dissolving power for lacquers, wall and facade paints, organic plasters

Does not cause any change in the stripped building structure

NMP-, NEP- and DCM-free

Biodegradable

Long open time

Scope of application

Mineral substrates (plaster, concrete, natural stone, etc.)

Wood, metal, GFRP and stucco.

Masonry, such as clinker, brick, etc.

All solvent-resistant substrates

Indoor and outdoor application

Application

Asur Allround Paint Remover dissolves and removes

1-component lacquers,

synthetic resin lacquers,

glazes,

matting,

polishes,

nitro-spirit lacquers,

beer lacquers,

oil paints,

emulsion and latex paints,

elastic building paints,

acrylates,

plastic plasters,

adhesives for glass fibre fabrics or similar,

PU foam.

Asur Allround Paint Remover can be used indoors and outdoors on small and large surfaces.

Thoroughly cover surfaces that are not to be stripped. Glass is not attacked.

Development of characteristics: Asur Allround Paint Remover is a DCM-free paint remover based on slowly evaporating solvents that dissolve the binder system of the paints to be removed, so that they can be easily removed or washed off. To develop the full dissolving properties, a sufficient saturated application of the material must be ensured. If too less Asur Allround Paint Remover has been applied, the surface will become dry and whitish. Always remove the dissolved coatings to the optimum dissolving point. Do not leave Asur Allround Paint Remover on the surface longer than necessary.

Supporting influences:

Warm temperatures, covering the stained surface with thin PE film (not a must!), indoors this significantly minimises the development of odours. Sufficiently long exposure time (test areas).

Disturbing influences:

Damp substrates, rain, draughts, low temperatures (cold), very highly absorbent substrates (caution: test thoroughly!), insufficient ventilation during application, insufficient application of material.

Reaction time: A few minutes to hours or days, under foil.

Processing

Preparatory actions:

Asur Allround Paint Remover is ready for use and must not be changed. Open the container. If liquid has settled (this is not a defect) stir the product. Apply Asur evenly with brush, tassel, brush, roller, spatula, trowel, smoothing trowel (no plastic bristles).

Caution: Always clean surfaces that have been contaminated by paint stripper or paint stripper coating mixture for a longer period of time with water as soon as possible, otherwise there is a risk of staining. Mask plastic windows, cables etc. as follows: Double-sided adhesive tape, apply PE construction film on it without wrinkles, then stick on another adhesive tape (e.g. packing tape in brown). After wetting with paint remover, remove the brown packing tape immediately. Remove the double-sided adhesive tape immediately after reaction time of the paint stripper and after the remaining area have been washed off.

Test areas: For large objects, several test areas should be created at different locations to determine the coating build-up and dissolution progress. Test area size approx. DIN A4 lengthwise format. Apply Asur Allround Paint Remover with a trowel at least3 mm at the beginning and let it slowly run out towards zero. Cover one half of the long format with foil. Note the date, time and temperature and test the surface at different intervals. This way you will know the exposure time, possible consumption and open time of the paint remover. If the product does not show the desired result, further test areas are required according to the application table.

Specifications

Appearance:

Viscous beige liquid

Viscosity:

10000 mPas

Minimum processing temperature:

10 ^oC

Composition:

Contains n-butylpyrrolidone (> 25%)