MILLIPUT EPOXY PUTTY

Milliput is an epoxy putty available in four grades: standard yellow/grey, silver grey, superfine white and terracotta.  Each grade is presented in similar packs containing 2 x 56,7gr sticks and the general instructions for preparation and usage are the same.

The two sticks have a long shelf life but once mixed the resultant putty is at first soft and highly adhesive and then gradually hardens. Speed of hardening is dependant on temperature and at normal temperatures (20-25oC) Milliput becomes rock hard in three to four hours. By the application of heat the setting time can be reduced to a few minutes.

After setting hard Milliput continues to cure and is fully cured after an elapse of time equal to the setting time at the same temperature. Once fully cured Milliput can be machined, drilled, tapped, turned, filed, sawn, sandpapered and painted. Milliput can be sandpapered and painted immediately it has set.

Milliput is an excellent adhesive and will bond any of the following to itself or to any of the others - wood, brick, cement, metals, concrete, plastics, glass etc, but note that Milliput is not intended as a thin layer adhesive and should not be used where a paste, mucilage or thin glue is indicated. Milliput will set under water and is heat resistant up to 130°C.

Photo Code Title Quantity
MILLIPUT EPOXY PUTTY SUPERFINE WHITE 113 gr 04.04.00.007 MILLIPUT EPOXY PUTTY SUPERFINE WHITE 113 gr Add this item to the basket
MILLIPUT EPOXY PUTTY YELLOW/GREY 113 g 04.04.00.014 MILLIPUT EPOXY PUTTY YELLOW/GREY 113 g Add this item to the basket
MILLIPUT EPOXY PUTTY SILVER/GREY 113 g 04.04.00.015 MILLIPUT EPOXY PUTTY SILVER/GREY 113 g Add this item to the basket
MILLIPUT EPOXY PUTTY TERRACOTTA 113 g 04.04.00.016 MILLIPUT EPOXY PUTTY TERRACOTTA 113 g Add this item to the basket